class CrosstalkAdaptiveSchedule(*args, **kwargs)[código fonte]

Crosstalk mitigation through adaptive instruction scheduling.

Parâmetros
• backend_prop (BackendProperties) – backend properties object

• crosstalk_prop (dict) –

crosstalk properties object crosstalk_prop[g1][g2] specifies the conditional error rate of g1 when g1 and g2 are executed simultaneously. g1 should be a two-qubit tuple of the form (x,y) where x and y are physical qubit ids. g2 can be either two-qubit tuple (x,y) or single-qubit tuple (x). We currently ignore crosstalk between pairs of single-qubit gates. Gate pairs which are not specified are assumed to be crosstalk free.

Example:

crosstalk_prop = {(0, 1) : {(2, 3) : 0.2, (2) : 0.15},
(4, 5) : {(2, 3) : 0.1},
(2, 3) : {(0, 1) : 0.05, (4, 5): 0.05}}


The keys of the crosstalk_prop are tuples for ordered tuples for CX gates e.g., (0, 1) corresponding to CX 0, 1 in the hardware. Each key has an associated value dict which specifies the conditional error rates with nearby gates e.g., (0, 1) : {(2, 3) : 0.2, (2) : 0.15} means that CNOT 0, 1 has an error rate of 0.2 when it is executed in parallel with CNOT 2,3 and an error rate of 0.15 when it is executed in parallel with a single qubit gate on qubit 2.

• weight_factor (float) – weight of gate error/crosstalk terms in the objective $$weight_factor*fidelities + (1-weight_factor)*decoherence errors$$. Weight can be varied from 0 to 1, with 0 meaning that only decoherence errors are optimized and 1 meaning that only crosstalk errors are optimized. weight_factor should be tuned per application to get the best results.

• measured_qubits (list) – a list of qubits that will be measured in a particular circuit. This arg need not be specified for circuits which already include measure gates. The arg is useful when a subsequent module such as state_tomography_circuits inserts the measure gates. If CrosstalkAdaptiveSchedule is made aware of those measurements, it is included in the optimization.

Levanta

ImportError – if unable to import z3 solver

__init__(backend_prop, crosstalk_prop, weight_factor=0.5, measured_qubits=None)[código fonte]

Parâmetros
• backend_prop (BackendProperties) – backend properties object

• crosstalk_prop (dict) –

crosstalk properties object crosstalk_prop[g1][g2] specifies the conditional error rate of g1 when g1 and g2 are executed simultaneously. g1 should be a two-qubit tuple of the form (x,y) where x and y are physical qubit ids. g2 can be either two-qubit tuple (x,y) or single-qubit tuple (x). We currently ignore crosstalk between pairs of single-qubit gates. Gate pairs which are not specified are assumed to be crosstalk free.

Example:

crosstalk_prop = {(0, 1) : {(2, 3) : 0.2, (2) : 0.15},
(4, 5) : {(2, 3) : 0.1},
(2, 3) : {(0, 1) : 0.05, (4, 5): 0.05}}


The keys of the crosstalk_prop are tuples for ordered tuples for CX gates e.g., (0, 1) corresponding to CX 0, 1 in the hardware. Each key has an associated value dict which specifies the conditional error rates with nearby gates e.g., (0, 1) : {(2, 3) : 0.2, (2) : 0.15} means that CNOT 0, 1 has an error rate of 0.2 when it is executed in parallel with CNOT 2,3 and an error rate of 0.15 when it is executed in parallel with a single qubit gate on qubit 2.

• weight_factor (float) – weight of gate error/crosstalk terms in the objective $$weight_factor*fidelities + (1-weight_factor)*decoherence errors$$. Weight can be varied from 0 to 1, with 0 meaning that only decoherence errors are optimized and 1 meaning that only crosstalk errors are optimized. weight_factor should be tuned per application to get the best results.

• measured_qubits (list) – a list of qubits that will be measured in a particular circuit. This arg need not be specified for circuits which already include measure gates. The arg is useful when a subsequent module such as state_tomography_circuits inserts the measure gates. If CrosstalkAdaptiveSchedule is made aware of those measurements, it is included in the optimization.

Levanta

ImportError – if unable to import z3 solver

Methods

 __init__(backend_prop, crosstalk_prop[, …]) CrosstalkAdaptiveSchedule initializer. ID for each gate Basic variable bounds for optimization check_dag_dependency(gate1, gate2) gate2 is a DAG dependent of gate1 if it is a descendant of gate1 check_xtalk_dependency(t_1, t_2) Check if two gates have a crosstalk dependency. Set decoherence errors based on qubit lifetimes create_updated_dag(layers, barriers) Given a set of layers and barriers, construct a new dag Setup the variables required for Z3 optimization cx_tuple(gate) Representation for two-qubit gate Note: current implementation assumes that the CX error rates and crosstalk behavior are independent of gate direction enforce_schedule_on_dag(input_gate_times) Z3 outputs start times for each gate. Extract the set of program gates which potentially have crosstalk noise Gate A, B are overlapping if A is neither a descendant nor an ancestor of B. Extract gate start and finish times from Z3 solution Set gate fidelity based on gate overlap conditions filter_candidates(candidates, layer, …) For a gate G and layer L, L is a candidate layer for G if no gate in L has a DAG dependency with G, and if Z3 allows gates in L and G to overlap. find_layer(layers, triplet) Find the appropriate layer for a gate gate_tuple(gate) Representation for gate generate_barriers(layers) For each gate g, see if a barrier is required to serialize it with some previously processed gate is_significant_xtalk(gate1, gate2) Given two conditional gate error rates check if there is high crosstalk by comparing with independent error rates. Return the name of the pass. Objective function is a weighted combination of gate errors and decoherence errors This function assumes that gate durations and coherence times are in seconds in backend.properties() This function converts gate durations and coherence times to nanoseconds. powerset(iterable) Finds the set of all subsets of the given iterable This function is used to generate constraints for the Z3 optimization r2f(val) Convert Z3 Real to Python float Reset variables run(dag) Main scheduling function DAG scheduling constraints optimization Sets overlap indicator variables singleq_tuple(gate) Representation for single-qubit gate Setup and solve a Z3 optimization for finding the best schedule

Attributes

 is_analysis_pass Check if the pass is an analysis pass. is_transformation_pass Check if the pass is a transformation pass.
assign_gate_id(dag)[código fonte]

ID for each gate

basic_bounds()[código fonte]

Basic variable bounds for optimization

check_dag_dependency(gate1, gate2)[código fonte]

gate2 is a DAG dependent of gate1 if it is a descendant of gate1

check_xtalk_dependency(t_1, t_2)[código fonte]

Check if two gates have a crosstalk dependency. We do not consider crosstalk between pairs of single qubit gates.

coherence_constraints()[código fonte]

Set decoherence errors based on qubit lifetimes

create_updated_dag(layers, barriers)[código fonte]

Given a set of layers and barriers, construct a new dag

create_z3_vars()[código fonte]

Setup the variables required for Z3 optimization

cx_tuple(gate)[código fonte]

Representation for two-qubit gate Note: current implementation assumes that the CX error rates and crosstalk behavior are independent of gate direction

enforce_schedule_on_dag(input_gate_times)[código fonte]

Z3 outputs start times for each gate. Some gates need to be serialized to implement the Z3 schedule. This function inserts barriers to implement those serializations

extract_crosstalk_relevant_sets()[código fonte]

Extract the set of program gates which potentially have crosstalk noise

extract_dag_overlap_sets(dag)[código fonte]

Gate A, B are overlapping if A is neither a descendant nor an ancestor of B. Currenty overlaps (A,B) are considered when A is a 2q gate and B is either 2q or 1q gate.

extract_solution()[código fonte]

Extract gate start and finish times from Z3 solution

fidelity_constraints()[código fonte]

Set gate fidelity based on gate overlap conditions

filter_candidates(candidates, layer, layer_id, triplet)[código fonte]

For a gate G and layer L, L is a candidate layer for G if no gate in L has a DAG dependency with G, and if Z3 allows gates in L and G to overlap.

find_layer(layers, triplet)[código fonte]

Find the appropriate layer for a gate

gate_tuple(gate)[código fonte]

Representation for gate

generate_barriers(layers)[código fonte]

For each gate g, see if a barrier is required to serialize it with some previously processed gate

property is_analysis_pass

Check if the pass is an analysis pass.

If the pass is an AnalysisPass, that means that the pass can analyze the DAG and write the results of that analysis in the property set. Modifications on the DAG are not allowed by this kind of pass.

is_significant_xtalk(gate1, gate2)[código fonte]

Given two conditional gate error rates check if there is high crosstalk by comparing with independent error rates.

property is_transformation_pass

Check if the pass is a transformation pass.

If the pass is a TransformationPass, that means that the pass can manipulate the DAG, but cannot modify the property set (but it can be read).

name()

Return the name of the pass.

objective_function()[código fonte]

Objective function is a weighted combination of gate errors and decoherence errors

parse_backend_properties()[código fonte]

This function assumes that gate durations and coherence times are in seconds in backend.properties() This function converts gate durations and coherence times to nanoseconds.

powerset(iterable)[código fonte]

Finds the set of all subsets of the given iterable This function is used to generate constraints for the Z3 optimization

r2f(val)[código fonte]

Convert Z3 Real to Python float

reset()[código fonte]

Reset variables

run(dag)[código fonte]

Main scheduling function

scheduling_constraints()[código fonte]

DAG scheduling constraints optimization Sets overlap indicator variables

singleq_tuple(gate)[código fonte]

Representation for single-qubit gate

solve_optimization()[código fonte]

Setup and solve a Z3 optimization for finding the best schedule