qiskit.aqua.operators.list_ops.SummedOp¶

class
SummedOp
(oplist, coeff=1.0, abelian=False)[código fonte]¶ A class for lazily representing sums of Operators. Often Operators cannot be efficiently added to one another, but may be manipulated further so that they can be later. This class holds logic to indicate that the Operators in
oplist
are meant to be added together, and therefore if they reach a point in which they can be, such as after evaluation or conversion to matrices, they can be reduced by addition. Parâmetros
oplist (
List
[OperatorBase
]) – The Operators being summed.coeff (
Union
[int
,float
,complex
,ParameterExpression
]) – A coefficient multiplying the operatorabelian (
bool
) – Indicates whether the Operators inoplist
are known to mutually commute.

__init__
(oplist, coeff=1.0, abelian=False)[código fonte]¶  Parâmetros
oplist (
List
[OperatorBase
]) – The Operators being summed.coeff (
Union
[int
,float
,complex
,ParameterExpression
]) – A coefficient multiplying the operatorabelian (
bool
) – Indicates whether the Operators inoplist
are known to mutually commute.
Methods
__init__
(oplist[, coeff, abelian]) type oplist
List
[OperatorBase
]
add
(other)Return Operator addition of
self
andother
, overloaded by+
.adjoint
()Return a new Operator equal to the Operator’s adjoint (conjugate transpose), overloaded by
~
.assign_parameters
(param_dict)Binds scalar values to any Terra
Parameters
in the coefficients or primitives of the Operator, or substitutes oneParameter
for another.bind_parameters
(param_dict)Same as assign_parameters, but maintained for consistency with QuantumCircuit in Terra (which has both assign_parameters and bind_parameters).
Return Operator by simplifying duplicate operators.
compose
(other[, permutation, front])Return Operator Composition between self and other (linear algebrastyle: A@B(x) = A(B(x))), overloaded by
@
.equals
(other)Check if other is equal to self.
eval
([front])Evaluate the Operator’s underlying function, either on a binary string or another Operator.
exp_i
()Return an
OperatorBase
equivalent to an exponentiation of self * i, e^(i*op).log_i
([massive])Return a
MatrixOp
equivalent to log(H)/i for this operator H.mul
(scalar)Returns the scalar multiplication of the Operator, overloaded by
*
, including support for Terra’sParameters
, which can be bound to values later (viabind_parameters
).neg
()Return the Operator’s negation, effectively just multiplying by 1.0, overloaded by

.permute
(permutation)Permute the qubits of the operator.
power
(exponent)Return Operator composed with self multiple times, overloaded by
**
.Return a set of strings describing the primitives contained in the Operator.
Print out the operator in details.
reduce
()Try collapsing list or trees of sums.
tensor
(other)Return tensor product between self and other, overloaded by
^
.tensorpower
(other)Return tensor product with self multiple times, overloaded by
^
.Returns the quantum circuit, representing the SummedOp.
Returns an equivalent Operator composed of only QuantumCircuitbased primitives, such as
CircuitOp
andCircuitStateFn
.to_legacy_op
([massive])Attempt to return the Legacy Operator representation of the Operator.
to_matrix
([massive])Return NumPy representation of the Operator.
to_matrix_op
([massive])Returns an equivalent Operator composed of only NumPybased primitives, such as
MatrixOp
andVectorStateFn
.to_pauli_op
([massive])Returns an equivalent Operator composed of only Paulibased primitives, such as
PauliOp
.Returns SciPy sparse matrix representation of the Operator.
traverse
(convert_fn[, coeff])Apply the convert_fn to each node in the oplist.
Attributes
ENABLE_DEPRECATION
INDENTATION
Whether the Operators in
oplist
are known to commute with one another.The scalar coefficient multiplying the Operator.
The function defining how to combine
oplist
(or Numbers, or NumPy arrays) to produce the Operator’s underlying function.Indicates whether the ListOp or subclass is distributive under composition.
The gradient of
combo_fn
.The number of qubits over which the Operator is defined.
The list of
OperatorBases
defining the underlying function of this Operator.Return a set of Parameter objects contained in the Operator.

property
abelian
¶ Whether the Operators in
oplist
are known to commute with one another. Tipo de retorno
bool
 Retorna
A bool indicating whether the
oplist
is Abelian.

add
(other)[código fonte]¶ Return Operator addition of
self
andother
, overloaded by+
.Nota
This appends
other
toself.oplist
without checkingother
is already included or not. If you want to simplify them, please usesimplify()
. Parâmetros
other (
OperatorBase
) – AnOperatorBase
with the same number of qubits as self, and in the same ‘Operator’, ‘State function’, or ‘Measurement’ category as self (i.e. the same type of underlying function). Tipo de retorno
OperatorBase
 Retorna
A
SummedOp
equivalent to the sum of self and other.

adjoint
()¶ Return a new Operator equal to the Operator’s adjoint (conjugate transpose), overloaded by
~
. For StateFns, this also turns the StateFn into a measurement. Tipo de retorno
OperatorBase
 Retorna
An
OperatorBase
equivalent to the adjoint of self.

assign_parameters
(param_dict)¶ Binds scalar values to any Terra
Parameters
in the coefficients or primitives of the Operator, or substitutes oneParameter
for another. This method differs from Terra’sassign_parameters
in that it also supports lists of values to assign for a giveParameter
, in which case self will be copied for each parameterization in the binding list(s), and all the copies will be returned in anOpList
. If lists of parameterizations are used, everyParameter
in the param_dict must have the same length list of parameterizations. Parâmetros
param_dict (
dict
) – The dictionary ofParameters
to replace, and values or lists of values by which to replace them. Tipo de retorno
OperatorBase
 Retorna
The
OperatorBase
with theParameters
in self replaced by the values orParameters
in param_dict. If param_dict contains parameterization lists, thisOperatorBase
is anOpList
.

bind_parameters
(param_dict)¶ Same as assign_parameters, but maintained for consistency with QuantumCircuit in Terra (which has both assign_parameters and bind_parameters).
 Tipo de retorno
OperatorBase

property
coeff
¶ The scalar coefficient multiplying the Operator.
 Tipo de retorno
Union
[int
,float
,complex
,ParameterExpression
] Retorna
The coefficient.

collapse_summands
()[código fonte]¶ Return Operator by simplifying duplicate operators.
E.g.,
SummedOp([2 * X ^ Y, X ^ Y]).collapse_summands() > SummedOp([3 * X ^ Y])
. Tipo de retorno
SummedOp
 Retorna
A simplified
SummedOp
equivalent to self.

property
combo_fn
¶ The function defining how to combine
oplist
(or Numbers, or NumPy arrays) to produce the Operator’s underlying function. For example, SummedOp’s combination function is to add all of the Operators inoplist
. Tipo de retorno
Callable
 Retorna
The combination function.

compose
(other, permutation=None, front=False)¶ Return Operator Composition between self and other (linear algebrastyle: A@B(x) = A(B(x))), overloaded by
@
.Note: You must be conscious of Quantum Circuit vs. Linear Algebra ordering conventions. Meaning, X.compose(Y) produces an X∘Y on qubit 0, but would produce a QuantumCircuit which looks like
[Y][X]
Because Terra prints circuits with the initial state at the left side of the circuit.
 Parâmetros
other (
OperatorBase
) – TheOperatorBase
with which to compose self.permutation (
Optional
[List
[int
]]) –List[int]
which defines permutation on other operator.front (
bool
) – If front==True, returnother.compose(self)
.
 Tipo de retorno
OperatorBase
 Retorna
An
OperatorBase
equivalent to the function composition of self and other.

property
distributive
¶ Indicates whether the ListOp or subclass is distributive under composition. ListOp and SummedOp are, meaning that (opv @ op) = (opv[0] @ op + opv[1] @ op) (using plus for SummedOp, list for ListOp, etc.), while ComposedOp and TensoredOp do not behave this way.
 Tipo de retorno
bool
 Retorna
A bool indicating whether the ListOp is distributive under composition.

equals
(other)[código fonte]¶ Check if other is equal to self.
Nota
This is not a mathematical check for equality. If
self
andother
implement the same operation but differ in the representation (e.g. different type of summands)equals
will evaluate toFalse
. Parâmetros
other (
OperatorBase
) – The other operator to check for equality. Tipo de retorno
bool
 Retorna
True, if other and self are equal, otherwise False.
Exemplos
>>> from qiskit.aqua.operators import X, Z >>> 2 * X == X + X True >>> X + Z == Z + X True

eval
(front=None)¶ Evaluate the Operator’s underlying function, either on a binary string or another Operator. A square binary Operator can be defined as a function taking a binary function to another binary function. This method returns the value of that function for a given StateFn or binary string. For example,
op.eval('0110').eval('1110')
can be seen as querying the Operator’s matrix representation by row 6 and column 14, and will return the complex value at those “indices.” Similarly for a StateFn,op.eval('1011')
will return the complex value at row 11 of the vector representation of the StateFn, as all StateFns are defined to be evaluated from Zero implicitly (i.e. it is as if.eval('0000')
is already called implicitly to always “indexing” from column 0).ListOp’s eval recursively evaluates each Operator in
oplist
, and combines the results using the recombination functioncombo_fn
. Parâmetros
front (
Union
[str
,Dict
[str
,complex
],OperatorBase
,None
]) – The bitstring, dict of bitstrings (with values being coefficients), or StateFn to evaluated by the Operator’s underlying function. Tipo de retorno
Union
[OperatorBase
,float
,complex
,list
] Retorna
The output of the
oplist
Operators’ evaluation function, combined with thecombo_fn
. If either self or front contain properListOps
(not ListOp subclasses), the result is an ndimensional list of complex or StateFn results, resulting from the recursive evaluation by each OperatorBase in the ListOps. Levanta
NotImplementedError – Raised if called for a subclass which is not distributive.
TypeError – Operators with mixed hierarchies, such as a ListOp containing both PrimitiveOps and ListOps, are not supported.
NotImplementedError – Attempting to call ListOp’s eval from a nondistributive subclass.

exp_i
()¶ Return an
OperatorBase
equivalent to an exponentiation of self * i, e^(i*op). Tipo de retorno
OperatorBase

property
grad_combo_fn
¶ The gradient of
combo_fn
. Tipo de retorno
Optional
[Callable
]

log_i
(massive=False)¶ Return a
MatrixOp
equivalent to log(H)/i for this operator H. This function is the effective inverse of exp_i, equivalent to finding the Hermitian Operator which produces self when exponentiated. For proper ListOps, applieslog_i
to all ops in oplist. Tipo de retorno
OperatorBase

mul
(scalar)¶ Returns the scalar multiplication of the Operator, overloaded by
*
, including support for Terra’sParameters
, which can be bound to values later (viabind_parameters
). Parâmetros
scalar (
Union
[int
,float
,complex
,ParameterExpression
]) – The real or complex scalar by which to multiply the Operator, or theParameterExpression
to serve as a placeholder for a scalar factor. Tipo de retorno
OperatorBase
 Retorna
An
OperatorBase
equivalent to product of self and scalar.

neg
()¶ Return the Operator’s negation, effectively just multiplying by 1.0, overloaded by

. Tipo de retorno
OperatorBase
 Retorna
An
OperatorBase
equivalent to the negation of self.

property
num_qubits
¶ The number of qubits over which the Operator is defined. If
op.num_qubits == 5
, thenop.eval('1' * 5)
will be valid, butop.eval('11')
will not. Tipo de retorno
int
 Retorna
The number of qubits accepted by the Operator’s underlying function.

property
oplist
¶ The list of
OperatorBases
defining the underlying function of this Operator. Tipo de retorno
List
[OperatorBase
] Retorna
The Operators defining the ListOp

property
parameters
¶ Return a set of Parameter objects contained in the Operator.

permute
(permutation)¶ Permute the qubits of the operator.
 Parâmetros
permutation (
List
[int
]) – A list defining where each qubit should be permuted. The qubit at index j should be permuted to position permutation[j]. Tipo de retorno
ListOp
 Retorna
A new ListOp representing the permuted operator.
 Levanta
AquaError – if indices do not define a new index for each qubit.

power
(exponent)¶ Return Operator composed with self multiple times, overloaded by
**
. Parâmetros
exponent (
int
) – The int number of times to compose self with itself. Tipo de retorno
OperatorBase
 Retorna
An
OperatorBase
equivalent to self composed with itself exponent times.

primitive_strings
()¶ Return a set of strings describing the primitives contained in the Operator. For example,
{'QuantumCircuit', 'Pauli'}
. For hierarchical Operators, such asListOps
, this can help illuminate the primitives represented in the various recursive levels, and therefore which conversions can be applied. Tipo de retorno
Set
[str
] Retorna
A set of strings describing the primitives contained within the Operator.

print_details
()[código fonte]¶ Print out the operator in details. :returns: a formatted string describes the operator. :rtype: str

reduce
()[código fonte]¶ Try collapsing list or trees of sums.
Tries to sum up duplicate operators and reduces the operators in the sum.
 Tipo de retorno
OperatorBase
 Retorna
A collapsed version of self, if possible.

tensor
(other)¶ Return tensor product between self and other, overloaded by
^
. Note: You must be conscious of Qiskit’s bigendian bit printing convention. Meaning, X.tensor(Y) produces an X on qubit 0 and an Y on qubit 1, or X⨂Y, but would produce a QuantumCircuit which looks like[Y] [X]
Because Terra prints circuits and results with qubit 0 at the end of the string or circuit.
 Parâmetros
other (
OperatorBase
) – TheOperatorBase
to tensor product with self. Tipo de retorno
OperatorBase
 Retorna
An
OperatorBase
equivalent to the tensor product of self and other.

tensorpower
(other)¶ Return tensor product with self multiple times, overloaded by
^
. Parâmetros
other (
int
) – The int number of times to tensor product self with itself viatensorpower
. Tipo de retorno
Union
[OperatorBase
,int
] Retorna
An
OperatorBase
equivalent to the tensorpower of self by other.

to_circuit
()[código fonte]¶ Returns the quantum circuit, representing the SummedOp. In the first step, the SummedOp is converted to MatrixOp. This is straightforward for most operators, but it is not supported for operators containing parametrized PrimitiveOps (in that case, AquaError is raised). In the next step, the MatrixOp representation of SummedOp is converted to circuit. In most cases, if the summands themselves are unitary operators, the SummedOp itself is nonunitary and can not be converted to circuit. In that case, ExtensionError is raised in the underlying modules.
 Tipo de retorno
QuantumCircuit
 Retorna
The circuit representation of the summed operator.
 Levanta
AquaError – if SummedOp can not be converted to MatrixOp (e.g. SummedOp is composed of
parametrized PrimitiveOps) –

to_circuit_op
()¶ Returns an equivalent Operator composed of only QuantumCircuitbased primitives, such as
CircuitOp
andCircuitStateFn
. Tipo de retorno
OperatorBase

to_legacy_op
(massive=False)[código fonte]¶ Attempt to return the Legacy Operator representation of the Operator. If self is a
SummedOp
ofPauliOps
, will attempt to convert toWeightedPauliOperator
, and otherwise will simply convert toMatrixOp
and then toMatrixOperator
. The Legacy Operators cannot representStateFns
or properListOps
(meaning not one of theListOp
subclasses), so an error will be thrown if this method is called on such an Operator. Also, Legacy Operators cannot represent unbound Parameter coeffs, so an error will be thrown if any are present in self.Warn if more than 16 qubits to force having to set
massive=True
if such a large vector is desired. Tipo de retorno
LegacyBaseOperator
 Retorna
The
LegacyBaseOperator
representing this Operator. Levanta
TypeError – self is an Operator which cannot be represented by a
LegacyBaseOperator
, such asStateFn
, proper (nonsubclass)ListOp
, or an Operator with an unbound coeff Parameter.

to_matrix
(massive=False)¶ Return NumPy representation of the Operator. Represents the evaluation of the Operator’s underlying function on every combination of basis binary strings. Warn if more than 16 qubits to force having to set
massive=True
if such a large vector is desired. Tipo de retorno
ndarray
 Retorna
The NumPy
ndarray
equivalent to this Operator.

to_matrix_op
(massive=False)[código fonte]¶ Returns an equivalent Operator composed of only NumPybased primitives, such as
MatrixOp
andVectorStateFn
. Tipo de retorno
OperatorBase

to_pauli_op
(massive=False)¶ Returns an equivalent Operator composed of only Paulibased primitives, such as
PauliOp
. Tipo de retorno
OperatorBase

to_spmatrix
()¶ Returns SciPy sparse matrix representation of the Operator.
 Tipo de retorno
Union
[spmatrix
,List
[spmatrix
]] Retorna
CSR sparse matrix representation of the Operator, or List thereof.

traverse
(convert_fn, coeff=None)¶ Apply the convert_fn to each node in the oplist.
 Parâmetros
convert_fn (
Callable
) – The function to apply to the internal OperatorBase.coeff (
Union
[int
,float
,complex
,ParameterExpression
,None
]) – A coefficient to multiply by after applying convert_fn. If it is None, self.coeff is used instead.
 Tipo de retorno
OperatorBase
 Retorna
The converted ListOp.