SetPhase¶

class SetPhase(phase, channel, name=None)[ソース]¶

ベースクラス: Instruction

The set phase instruction sets the phase of the proceeding pulses on that channel to phase radians.

In particular, a PulseChannel creates pulses of the form

\[Re[\exp(i 2\pi f jdt + \phi) d_j]\]

The SetPhase instruction sets \(\phi\) to the instruction’s phase operand.

Instantiate a set phase instruction, setting the output signal phase on channel to phase [radians].

パラメータ

phase (Union[complex, ParameterExpression]) – The rotation angle in radians.
channel (PulseChannel) – The channel this instruction operates on.
name (Optional[str]) – Display name for this instruction.

Methods

`append`	Return a new `Schedule` with `schedule` inserted at the maximum time over all channels shared between `self` and `schedule`.
`ch_duration`	Return duration of the supplied channels in this Instruction.
`ch_start_time`	Return minimum start time for supplied channels.
`ch_stop_time`	Return maximum start time for supplied channels.
`draw`	Plot the instruction.
`insert`	Return a new `Schedule` with `schedule` inserted within `self` at `start_time`.
`is_parameterized`	Return True iff the instruction is parameterized.
`shift`	Return a new schedule shifted forward by time.

Attributes

channel¶

Return the Channel that this instruction is scheduled on.

channels¶

Returns the channels that this schedule uses.

duration¶

Duration of this instruction.

Unique identifier for this instruction.

instructions¶

Iterable for getting instructions from Schedule tree.

name¶

Name of this instruction.

operands¶

Return instruction operands.

parameters¶

Parameters which determine the instruction behavior.

phase¶

Return the rotation angle enacted by this instruction in radians.

start_time¶

Relative begin time of this instruction.

stop_time¶

Relative end time of this instruction.