C贸digo fuente para qiskit.transpiler.passes.scheduling.alignments.reschedule

# This code is part of Qiskit.
#
# (C) Copyright IBM 2022.
#
# This code is licensed under the Apache License, Version 2.0. You may
# obtain a copy of this license in the LICENSE.txt file in the root directory
# of this source tree or at http://www.apache.org/licenses/LICENSE-2.0.
#
# Any modifications or derivative works of this code must retain this
# copyright notice, and modified files need to carry a notice indicating
# that they have been altered from the originals.

"""Rescheduler pass to adjust node start times."""
from __future__ import annotations
from collections.abc import Generator

from qiskit.circuit.gate import Gate
from qiskit.circuit.delay import Delay
from qiskit.circuit.measure import Measure
from qiskit.dagcircuit import DAGCircuit, DAGOpNode, DAGOutNode
from qiskit.transpiler.basepasses import AnalysisPass
from qiskit.transpiler.exceptions import TranspilerError


[documentos]class ConstrainedReschedule(AnalysisPass): """Rescheduler pass that updates node start times to conform to the hardware alignments. This pass shifts DAG node start times previously scheduled with one of the scheduling passes, e.g. :class:`ASAPScheduleAnalysis` or :class:`ALAPScheduleAnalysis`, so that every instruction start time satisfies alignment constraints. Examples: We assume executing the following circuit on a backend with 16 dt of acquire alignment. .. parsed-literal:: 鈹屸攢鈹鈹鈹愨攲鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹愨攲鈹鈹 q_0: 鈹 X 鈹溾敜 Delay(100[dt]) 鈹溾敜M鈹 鈹斺攢鈹鈹鈹樷敂鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹樷敂鈺モ敇 c: 1/鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺┾晲 0 Note that delay of 100 dt induces a misalignment of 4 dt at the measurement. This pass appends an extra 12 dt time shift to the input circuit. .. parsed-literal:: 鈹屸攢鈹鈹鈹愨攲鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹愨攲鈹鈹 q_0: 鈹 X 鈹溾敜 Delay(112[dt]) 鈹溾敜M鈹 鈹斺攢鈹鈹鈹樷敂鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹鈹樷敂鈺モ敇 c: 1/鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺愨晲鈺┾晲 0 Notes: Your backend may execute circuits violating these alignment constraints. However, you may obtain erroneous measurement result because of the untracked phase originating in the instruction misalignment. """ def __init__( self, acquire_alignment: int = 1, pulse_alignment: int = 1, ): """Create new rescheduler pass. The alignment values depend on the control electronics of your quantum processor. Args: acquire_alignment: Integer number representing the minimum time resolution to trigger acquisition instruction in units of ``dt``. pulse_alignment: Integer number representing the minimum time resolution to trigger gate instruction in units of ``dt``. """ super().__init__() self.acquire_align = acquire_alignment self.pulse_align = pulse_alignment @classmethod def _get_next_gate(cls, dag: DAGCircuit, node: DAGOpNode) -> Generator[DAGOpNode, None, None]: """Get next non-delay nodes. Args: dag: DAG circuit to be rescheduled with constraints. node: Current node. Returns: A list of non-delay successors. """ for next_node in dag.successors(node): if not isinstance(next_node, DAGOutNode): yield next_node def _push_node_back(self, dag: DAGCircuit, node: DAGOpNode): """Update the start time of the current node to satisfy alignment constraints. Immediate successors are pushed back to avoid overlap and will be processed later. .. note:: This logic assumes the all bits in the qregs and cregs synchronously start and end, i.e. occupy the same time slot, but qregs and cregs can take different time slot due to classical I/O latencies. Args: dag: DAG circuit to be rescheduled with constraints. node: Current node. """ node_start_time = self.property_set["node_start_time"] conditional_latency = self.property_set.get("conditional_latency", 0) clbit_write_latency = self.property_set.get("clbit_write_latency", 0) if isinstance(node.op, Gate): alignment = self.pulse_align elif isinstance(node.op, Measure): alignment = self.acquire_align elif isinstance(node.op, Delay) or getattr(node.op, "_directive", False): # Directive or delay. These can start at arbitrary time. alignment = None else: raise TranspilerError(f"Unknown operation type for {repr(node)}.") this_t0 = node_start_time[node] if alignment is not None: misalignment = node_start_time[node] % alignment if misalignment != 0: shift = max(0, alignment - misalignment) else: shift = 0 this_t0 += shift node_start_time[node] = this_t0 # Compute shifted t1 of this node separately for qreg and creg new_t1q = this_t0 + node.op.duration this_qubits = set(node.qargs) if isinstance(node.op, Measure): # creg access ends at the end of instruction new_t1c = new_t1q this_clbits = set(node.cargs) else: if node.op.condition_bits: # conditional access ends at the beginning of node start time new_t1c = this_t0 this_clbits = set(node.op.condition_bits) else: new_t1c = None this_clbits = set() # Check immediate successors for overlap for next_node in self._get_next_gate(dag, node): # Compute next node start time separately for qreg and creg next_t0q = node_start_time[next_node] next_qubits = set(next_node.qargs) if isinstance(next_node.op, Measure): # creg access starts after write latency next_t0c = next_t0q + clbit_write_latency next_clbits = set(next_node.cargs) else: if next_node.op.condition_bits: # conditional access starts before node start time next_t0c = next_t0q - conditional_latency next_clbits = set(next_node.op.condition_bits) else: next_t0c = None next_clbits = set() # Compute overlap if there is qubits overlap if any(this_qubits & next_qubits): qreg_overlap = new_t1q - next_t0q else: qreg_overlap = 0 # Compute overlap if there is clbits overlap if any(this_clbits & next_clbits): creg_overlap = new_t1c - next_t0c else: creg_overlap = 0 # Shift next node if there is finite overlap in either in qubits or clbits overlap = max(qreg_overlap, creg_overlap) node_start_time[next_node] = node_start_time[next_node] + overlap
[documentos] def run(self, dag: DAGCircuit): """Run rescheduler. This pass should perform rescheduling to satisfy: - All DAGOpNode nodes (except for compiler directives) are placed at start time satisfying hardware alignment constraints. - The end time of a node does not overlap with the start time of successor nodes. Assumptions: - Topological order and absolute time order of DAGOpNode are consistent. - All bits in either qargs or cargs associated with node synchronously start. - Start time of qargs and cargs may different due to I/O latency. Based on the configurations above, the rescheduler pass takes the following strategy: 1. The nodes are processed in the topological order, from the beginning of the circuit (i.e. from left to right). For every node (including compiler directives), the function ``_push_node_back`` performs steps 2 and 3. 2. If the start time of the node violates the alignment constraint, the start time is increased to satisfy the constraint. 3. Each immediate successor whose start_time overlaps the node's end_time is pushed backwards (towards the end of the wire). Note that at this point the shifted successor does not need to satisfy the constraints, but this will be taken care of when that successor node itself is processed. 4. After every node is processed, all misalignment constraints will be resolved, and there will be no overlap between the nodes. Args: dag: DAG circuit to be rescheduled with constraints. Raises: TranspilerError: If circuit is not scheduled. """ if "node_start_time" not in self.property_set: raise TranspilerError( f"The input circuit {dag.name} is not scheduled. Call one of scheduling passes " f"before running the {self.__class__.__name__} pass." ) node_start_time = self.property_set["node_start_time"] for node in dag.topological_op_nodes(): start_time = node_start_time.get(node) if start_time is None: raise TranspilerError( f"Start time of {repr(node)} is not found. This node is likely added after " "this circuit is scheduled. Run scheduler again." ) if start_time == 0: # Every instruction can start at t=0. continue self._push_node_back(dag, node)